Full-Wave-Calibrated Element-Wise RIS Modeling With Cross-Aperture Coefficient Transfer for Multipath Channel Prediction

RESUMO

Practical reconfigurable intelligent surfaces (RISs) can exhibit deterministic parasitic scattering that is not captured by idealized element-wise models. As a result, such models may overestimate the gain of the intended RIS-assisted path and bias multipath prediction. This paper develops a full-wave-calibrated element-wise model using three Bragg-order basis functions to represent the intended and dominant parasitic scattering components. Environmental multipath is incorporated by identifying RIS--Rx reflection sequences with ray tracing (RT) and unfolding them by image theory into path-dependent image points. This allows direct and reflected RIS-assisted paths to be evaluated using the same per-element kernel and coherently combined with Tx--Rx bypass paths. To reduce the full-wave calibration burden for large RISs under a prescribed focusing configuration, only the three Bragg-order coefficients are transferred from a 25-by-25 calibration aperture, while the target-aperture basis functions and geometry are recomputed. At 154 GHz, the transferred coefficients keep the intended-order errors within 0.8 dB for the 50-by-50 and 100-by-100 RISs, while reducing the full-wave calibration time for the prescribed configuration from 7.56 to 1.08 h relative to direct 100-by-100 calibration. For multipath validation with the 50-by-50 RIS, the calibrated model using the same transferred coefficients keeps the nominal-Rx gain error within 0.88 dB across four PEC reflector configurations, compared with 1.75--5.51 dB for the uncalibrated general model, and reduces the error from 6.49 to 0.23 dB in the scaled indoor environment.