Surrogate-Assisted Inverse Design and Temperature-Dependent Electrothermal Analysis of an All-Oxide Narrowband Thermophotovoltaic Emitter

RESUMO

A narrowband emitter aligning with the bandgap of the underlying solar cell is essential for improving the spectral efficiency and thermal stability of thermophotovoltaic (TPV) systems. Emitters based on oxide materials present a promising solution to the optical and mechanical performance degradation of traditional emitters, which employ metal-dielectric structures that experience metal oxidation and structural deterioration at high temperatures. Here, we presented a surrogate-assisted inverse-design framework for a narrowband 1D grating emitter comprising ITO and Al2O3 layers on a sapphire substrate. We performed Bayesian optimization over the trained ExtraTrees surrogates on a penalty-augmented objective containing a peak-emission constraint (E_peak > 0.90) while minimizing the full width at half maximum (FWHM) and maximizing the fraction of emission concentrated within the selected peak-centered spectral band to acquire a high, narrowband peak emission. The surrogate model was trained using a dataset of emission spectra obtained from the finite-difference time-domain (FDTD) by systematically varying the layers' thicknesses and the structure's period as the input features, and the narrowband emission's figure of merit (FOM) ((E_peak), wavelength of peak emission (_peak), FWHM, in-band fraction (f_in) for determining the amount of emission outside the peak band, and concentration of peak emission near the peak) was used as the prediction target. The resulting set of predictions for the optimized structure was further validated using the FDTD method.