Wideband HF Skywave Propagation: A Review with Link Modeling Corroborated by Propagation Data

RESUMO

The high-frequency (HF) band, ranging from 3 to 30 MHz, is widely used in a number of applications such as beyond-line-of-sight (BLOS) communications and over-the-horizon radar systems. The long-range propagation characteristics of the HF band rely on the Earth's ionosphere as a refracting medium to establish BLOS wireless links. However, traditional HF communications links often use channels with narrow bandwidths (typically 3 kHz), which limits the amount of data that can be transmitted. In this perspective article, we discuss the challenges of establishing wideband HF communications links with emphasis on the ionosphere, noise characteristics, antenna performance, and available bandwidth. Solar radiation drives ionospheric layering, where fluctuating electron densities determine usable frequencies that change with time of day, seasons, and latitude. Since background noise at HF decreases with increasing frequency, operating at the upper HF limit is advantageous. We present a noise prediction model following ITU Recommendation P.372-17 and highlight the role of high-directivity antennas such as Log-Periodic Dipole Arrays, in optimizing the signal-to-noise ratio of the link. Using ray tracing techniques, we model several representative wideband HF links that employ near-vertical-incidence skywave (NVIS) or long-range skywave modes over distances ranging from approximately 390 to 5,200 km. We examine the performance of these links for bandwidths up to 1 MHz and present their day and night ionograms, with transmitter and receiver locations spanning near-equatorial to high northern latitudes. The modeled maximum usable frequencies are corroborated against crowdsourced FT8 reception data and direct ionosonde measurements over the same period for links for which propagation data was available.