Why the better conductor surges in impedance: a low-cost demonstration of the skin effect at line frequency

RESUMO

When alternating current flows through a conductor, induced internal eddy currents suppress current flow in the core and restrict it to a thin surface layer. Although this effect, known as the skin effect, is covered in virtually every undergraduate electrodynamics course, it is rarely explored experimentally without specialized and expensive equipment, and is sometimes even considered a mere high-frequency phenomenon. Here, we present a readily accessible, quantitative demonstration of the skin effect at line frequency using only standard laboratory supplies: an AC/DC power supply, basic multimeters, and laboratory support rods as cylindrical conductors. Based on a precise four-point Kelvin sensing scheme capable of resolving milliohm-range resistances, we exploit relative magnetic permeability rather than high frequency as the governing parameter to control skin depth. For non-magnetic stainless steel, line frequency represents an electrodynamically low frequency, resulting in identical AC and DC behaviour; whereas for ferromagnetic structural steel, high permeability compresses the skin depth to the millimeter scale, causing a sharp surge in AC impedance. This produces a counterintuitive outcome where the statically superior conductor suffers a marked relative impedance increase, whereas the poorer conductor remains unaffected, challenging common student expectations and catalyzing cognitive activation. Depending on the instructional setting, the approach can be implemented either as a quick lecture demonstration or as a quantitative experiment within an undergraduate laboratory course.